AEE Wireless Security Baby Monitor with Remote Pan and Tilt Control - 601LD

It has remote pan and tilt control, with 2.5 inch LCD screen to monitor the active of the baby. Baby monitor allows you to keep tabs on your little one without standing vigil outside your child's door. These compact two-part gadgets(tansmitter and receiver) are particularly useful when your infant wake in the middle of the night and needs you to feed, change, or comfort him. During the day, a monitor also give you much freedom during nap time to take care your baby.

Package Contains :

• 1 x A/V cable
• 2 x Adapter
• 1 x Charger
• 1 x Earphone

Information

Transmission frequency

ISM 2,400MHz-2,483MHz

Modulation type

FM

Antenna type

Omni

Transmission distance

100m (without block)

Operating temperature

-10°C - 50°C / 14°F - 122°F

Storage temperature

-20°C - 60°C / -4°F - 140°F

Operating humidity

85% RH

Net weight

1.38 kg

Size	53*13.5*79 cm

Camera

Imaging sensor: CMOS CMOS total pixels: 628*582(PAL); 510*492 (NTSC) Horizontal resolution: 380 TV lines View angle: 62° Minimum illumination: 5.0lux/F1.2 and 0 lux (IR ON) Transmission power: 10mW / CE; 2mW / FCC Power supply: DC 9V 1.5A Pan angel: ±90° Tilt angle: ±30° Max. P/T speed: 90°/s Max.load of motor: 500 g Dimensions(W*D*H): 71*73*44 mm Night vision range: 5m

Receiver

Receiving sensitiving: -85dBm LCD type: TFT LCD screen size: 2.5 inch Resolution: 480*234 Active area: 49.2*38.142 mm Dot pitch: 0.1025*0.163 mm View angel: 10°/ 30°/ 45°/ 45°(Min.) Brightness: 250cd/m^3 Contrast ratio: 150:1 Interface: alternated video signal Light source: CCFL(cold cathode flurescent lamps) Power supply: DC 5V 2A Consumption current: 700mA Video output level: 1Vp-p@ 75 ohm Audio output level: 1Vp-p@ 600 ohm Dimensions(W*D*H): 69*29*105 mm

Rate this product.